Magnevane’s innovative technology delivers more power than current sliding vane motors while consuming less air. The almost perfect vane sealing allows it to harness all compressed air input, with no leaking or slippage.
The air consumption ratio of a Magnevane driven motor reaches unprecedented values with more than 30% efficiency gains relatively to common existing motors, thereby setting a new industrial standard.
Magnevane vs. Standard Motor.
Same size, same pressure
Magnevane’s disruptive technology delivers more power than standard sliding vane motors while consuming less air. The almost perfect vanes sealing allows it to harness all the incoming compressed air, with no leaking or slippage. The air consumption ratio of a Magnevane enabled motor reaches unprecedented values with more than 30% efficiency gains relatively to common motors, setting a new industry standard.
As our sliding vane technology doesn’t depend on centrifugal force, springs, pins, or airflow to position the vanes, those are always kept in position even when the motor is idle. This particularity has a tremendous effect when setting the motor in motion, delivering outstanding initial torque amounts and perfect start-ups.
Furthermore, due to the magnetic vane positioning system, motors with Magnevane technology can be mounted on every single position, as gravity does not affect it on anyway.
Magnevane vs. Standard Motor
Same size, Torque match at different pressure
It is in the distribution network that most air losses occur and the most effective way to reduce those losses is to lower the pressure. Magnevane reaches the performance of standard air motors at lower pressure thus allowing to reduce the compressed air network pressure and consequently diminish energy loss.
Longer Vane Life-cycle
As Magnevane’s rotor technology does not resort to mechanical devices such as springs or pins, therefore it is not necessary to reserve space for them, our vanes have a higher wear thickness, meaning that they have a longer life cycle.
Full Power During Vanes Life Cycle
One of the most significant advantages of our motors, is the fact that during all vane life cycle, the delivered power will be always at 100%, contrarily to any other reference OEM’s which start to lose performance due to vane wear beyond 100 hours of usage.
As with the air consumption ratio, Magnevane technology also boosts torque. Magnevane powered motors generate an increase in torque of at least 20% over similar sized motors using existing technology.
Zero Mechanical Parts
Magnevane rotors uses zero mechanical parts to press the vanes against the stator cylinder and the magnetic force is guaranteed for dozens of years. This means that the usual wear and tear of springs and pins happening on common devices, simple doesn't exist on our technology. Only vanes require change at service intervals.
No Fatigue on High-Low Temperature Cycles
Conventional air motors using mechanical devices as springs or equivalent are subject to fatigue on constant hot and cold cycles environments. Magnevane’s technology is suitable for those temperature variation cycles as magnets increase their strength as the temperature moves away from the ambient temperature, either up or down.
Unlimited Mounting Positions
Due to the magnetic vane position system, Magnevane enabled motors can be mounted on every single position, as gravity does not affect it on anyway.